REFERENCES
1. Fukamachi, K.; Kimura, M. Age-hardening structure and mechanism of Cu-3at%Ni-1.5 at%Si Corson alloy. Mater. Sci. Eng. A. 2022, 831, 142220.
2. Wang, Z.; Li, J.; Fan, Z.; et al. Effects of Co addition on the microstructure and properties of elastic Cu-Ni-Si-based alloys for electrical connectors. Materials 2021, 14, 1996.
3. Lu, L.; Shen, Y.; Chen, X.; Qian, L.; Lu, K. Ultrahigh strength and high electrical conductivity in copper. Science 2004, 304, 422-6.
4. Yakovtseva, O.; Mikhaylovskaya, A.; Pozdniakov, A.; Kotov, A.; Portnoy, V. Superplastic deformation behaviour of aluminium containing brasses. Mater. Sci. Eng. A. 2016, 674, 135-43.
5. Karthik, M.; Abhinav, J.; Shankar, K. V. Morphological and mechanical behaviour of Cu-Sn alloys - a review. Met. Mater. Int. 2021, 27, 1915-46.
6. Gao, X.; Wu, H. B.; Liu, M.; Zhang, Y. X.; Gao, F. Effect of deformation of multi-pass rolling on microstructure and properties of C71500 cupronickel alloy tube. Rare. Metal. Mat. Eng. 2021, 50, 3819-23.
7. Sun, L.; Li, X.; Li, C.; et al. Superior strength-ductility combination in dual-phase heterostructured H62 brass via gradient microstructures. J. Alloys. Compd. 2025, 1038, 182843.
8. Yan, Y.; Kou, S.; Yang, H.; et al. Ceramic particles reinforced copper matrix composites manufactured by advanced powder metallurgy: preparation, performance, and mechanisms. Int. J. Extrem. Manuf. 2023, 5, 032006.
9. Mao, Q.; Liu, Y.; Zhao, Y. A review on copper alloys with high strength and high electrical conductivity. J. Alloys. Compd. 2024, 990, 174456.
10. Hu, Z.; Jiang, Z.; Qiao, Z.; Wang, L.; Zhan, X.; Ma, Z. The well-balanced strength and conductivity in additively manufactured CuCrZr-Y2O3 composites by regulating multi-scale heterostructures. J. Manuf. Process. 2024, 131, 327-35.
11. Tang, X.; Chen, X.; Sun, F.; et al. A study on the mechanical and electrical properties of high-strength CuCrZr alloy fabricated using laser powder bed fusion. J. Alloys. Compd. 2022, 924, 166627.
12. Dong, X.; Gao, B.; Xiao, L.; et al. Heterostructured metallic structural materials: research methods, properties, and future perspectives. Adv. Funct. Mater. 2024, 34, 2410521.
13. Liu, Y.; Zhang, J.; Sun, Q.; et al. Laser powder bed fusion of copper matrix iron particle reinforced nanocomposite with high strength and high conductivity. J. Mater. Sci. Technol. 2023, 134, 50-9.
14. Bakhshaei, P.; Ataie, A.; Abdizadeh, H. Facile mechanical fabrication of Cu-Ni/CNT nanocomposite for improved microstructural, hardness, and electrical characteristics. Mater. Sci. Technol. 2024, 41, 1054-63.
15. Qi, L.; Wang, X.; Tian, W.; et al. Achieving excellent properties of Cu-2wt%Ag wire by annealing treatment and large deformation. Vacuum 2025, 239, 114362.
16. Liu, Y.; Zhang, J.; Tan, Q.; et al. Additive manufacturing of high strength copper alloy with heterogeneous grain structure through laser powder bed fusion. Acta. Mater. 2021, 220, 117311.
17. Li, S.; Luo, X.; Sun, Z.; et al. Construction of a dual heterogeneous lamella structure to improve the electrical conductivity and mechanical properties of Cu alloys. Mater. Lett. 2023, 338, 134016.
18. Wu, X. L.; Zhu, Y. T. Heterostructured metallic materials: plastic deformation and strain hardening. Acta. Metall. Sin. 2022, 58, 1349-59.
19. Fang, T. H.; Li, W. L.; Tao, N. R.; Lu, K. Revealing extraordinary intrinsic tensile plasticity in gradient nano-grained copper. Science 2011, 331, 1587-90.
20. Lu, K. Nanomaterials. Making strong nanomaterials ductile with gradients. Science 2014, 345, 1455-6.
21. Chen, A.; Li, D.; Zhang, J.; Song, H.; Lu, J. Make nanostructured metal exceptionally tough by introducing non-localized fracture behaviors. Scr. Mater. 2008, 59, 579-82.
22. Wu, X.; Jiang, P.; Chen, L.; Yuan, F.; Zhu, Y. T. Extraordinary strain hardening by gradient structure. Proc. Natl. Acad. Sci. USA. 2014, 111, 7197-201.
23. Shao, C.; Zhang, P.; Zhu, Y.; Zhang, Z.; Tian, Y.; Zhang, Z. Simultaneous improvement of strength and plasticity: Additional work-hardening from gradient microstructure. Acta. Mater. 2018, 145, 413-28.
24. Zeng, Z.; Li, X.; Xu, D.; Lu, L.; Gao, H.; Zhu, T. Gradient plasticity in gradient nano-grained metals. Extreme. Mechan. Lett. 2016, 8, 213-9.
25. Roumina, R.; Embury, J.; Bouaziz, O.; Zurob, H. Mechanical behavior of a compositionally graded 300M steel. Mater. Sci. Eng. A. 2013, 578, 140-9.
26. Pan, Q.; Zhang, L.; Feng, R.; et al. Gradient cell-structured high-entropy alloy with exceptional strength and ductility. Science 2021, 374, 984-9.
27. Cheng, Z.; Zhou, H.; Lu, Q.; Gao, H.; Lu, L. Extra strengthening and work hardening in gradient nanotwinned metals. Science 2018, 362, 559-67.
28. Du, X. H.; Li, W. P.; Chang, H. T.; et al. Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy. Nat. Commun. 2020, 11, 2390.
29. Yang, M.; Pan, Y.; Yuan, F.; Zhu, Y.; Wu, X. Back stress strengthening and strain hardening in gradient structure. Mater. Res. Lett. 2016, 4, 145-51.
30. Zhu, Y.; Wu, X. Perspective on hetero-deformation induced (HDI) hardening and back stress. Mater. Res. Lett. 2019, 7, 393-8.
31. Wu, X.; Yang, M.; Yuan, F.; et al. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility. Proc. Natl. Acad. Sci. USA. 2015, 112, 14501-5.
32. Gao, H.; Huang, Y. Geometrically necessary dislocation and size-dependent plasticity. Scr. Mater. 2003, 48, 113-8.
33. Huang, Y.; Gao, H.; Nix, W.; Hutchinson, J. Mechanism-based strain gradient plasticity - II. analysis. J. Mech. Phys. Solids. 2000, 48, 99-128.
34. Wang, H.; Tao, N.; Lu, K. Strengthening an austenitic Fe-Mn steel using nanotwinned austenitic grains. Acta. Mater. 2012, 60, 4027-40.
35. Cheng, Z.; Bu, L.; Zhang, Y.; et al. Unraveling the origin of extra strengthening in gradient nanotwinned metals. Proc. Natl. Acad. Sci. USA. 2022, 119, 8.
36. Jiang, S.; Wang, H.; Wu, Y.; et al. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation. Nature 2017, 544, 460-4.
37. Moniri, S.; Yang, Y.; Ding, J.; et al. Three-dimensional atomic structure and local chemical order of medium- and high-entropy nanoalloys. Nature 2023, 624, 564-9.
38. Wang, J.; Jiang, P.; Yuan, F.; Wu, X. Chemical medium-range order in a medium-entropy alloy. Nat. Commun. 2022, 13, 1021.
39. Lei, Z.; Liu, X.; Wu, Y.; et al. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes. Nature 2018, 563, 546-50.
40. Chen, X.; Wang, Q.; Cheng, Z.; et al. Direct observation of chemical short-range order in a medium-entropy alloy. Nature 2021, 592, 712-6.
41. Li, Q. J.; Sheng, H.; Ma, E. Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways. Nat. Commun. 2019, 10, 3563.
42. Zhu, Y.; Ameyama, K.; Anderson, P. M.; et al. Heterostructured materials: superior properties from hetero-zone interaction. Mater. Res. Lett. 2020, 9, 1-31.
43. Wu, X.; Zhu, Y.; Lu, K. Ductility and strain hardening in gradient and lamellar structured materials. Scr. Mater. 2020, 186, 321-5.
44. Wu, X.; Zhu, Y. Gradient and lamellar heterostructures for superior mechanical properties. MRS. Bull. 2021, 46, 244-9.
45. Li, J.; Zhang, Q.; Huang, R.; Li, X.; Gao, H. Towards understanding the structure-property relationships of heterogeneous-structured materials. Scr. Mater. 2020, 186, 304-11.
47. Wu, X.; Zhu, Y. Heterogeneous materials: a new class of materials with unprecedented mechanical properties. Mater. Res. Lett. 2017, 5, 527-32.
48. Mughrabi, H. On the role of strain gradients and long-range internal stresses in the composite model of crystal plasticity. Mater. Sci. Eng. A. 2001, 317, 171-80.
49. Levine, L. E.; Geantil, P.; Larson, B. C.; et al. Disordered long-range internal stresses in deformed copper and the mechanisms underlying plastic deformation. Acta. Mater. 2011, 59, 5803-11.
50. Zhou, H.; Huang, C.; Sha, X.; et al. In-situ observation of dislocation dynamics near heterostructured interfaces. Mater. Res. Lett. 2019, 7, 376-82.
51. Ma, X.; Huang, C.; Moering, J.; et al. Mechanical properties of copper/bronze laminates: role of interfaces. Acta. Mater. 2016, 116, 43-52.
52. Ma, E.; Wu, X. Tailoring heterogeneities in high-entropy alloys to promote strength-ductility synergy. Nat. Commun. 2019, 10, 5623.
53. Ma, J.; Zhou, Y.; He, W.; Jiang, B.; Liu, Q. Study on microstructures and mechanical properties of layered and layered-gradient Zr/Ti materials. Adv. Eng. Mater. 2021, 24, 2100805.
54. Shi, P.; Ren, W.; Zheng, T.; et al. Enhanced strength-ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae. Nat. Commun. 2019, 10, 489.
55. Tang, J.; Chen, L.; Chen, Y.; Qian, L.; Que, B. Enhanced strength-ductility synergy of Al/Zn/Al laminated composite with unique interface and multi-modal heterogeneous microstructure. Mater. Charact. 2024, 207, 113535.
56. Wang, L.; Qu, S.; Fu, H.; et al. Additively manufactured copper alloy with heterogeneous nanoprecipitates-dislocation architecture for superior strength-ductility-conductivity synergy. Addit. Manuf. 2024, 84, 104100.
57. Liu, W.; Chen, X.; Ahmad, T.; et al. Microstructures and mechanical properties of Cu-Ti alloys with ultrahigh strength and high ductility by thermo-mechanical treatment. Mater. Sci. Eng. A. 2022, 835, 142672.
58. Cheng, Z.; Wan, T.; Lu, L. Interface strain gradient enabled high strength and hardening in laminated nanotwinned Cu. Acta. Mater. 2023, 256, 119138.
59. Yang, H.; Li, K.; Bu, Y.; et al. Nanoprecipitates induced dislocation pinning and multiplication strategy for designing high strength, plasticity and conductivity Cu alloys. Scr. Mater. 2021, 195, 113741.
60. Xu, L.; Huang, Z.; Shen, Q.; Chen, F. Effect of stacking fault energy on hetero-deformation in gradient nanograined Cu-Ni alloys. Mechan. Mater. 2024, 196, 105074.
61. Ye, S.; Liu, Z.; Feng, X.; et al. Heterostructure and multiple nano-phases achieve superior strength-ductility-conductivity synergy of laser additive manufacturing copper alloy. Virtual. Phys. Prototyp. 2024, 20, e2437467.
62. Lee, H.; Park, H.; Jung, J.; Amanov, A.; Kim, H. Multi-layered gradient structure manufactured by single-roll angular-rolling and ultrasonic nanocrystalline surface modification. Scr. Mater. 2020, 186, 52-6.
63. Chu, Z. Q.; Fan, Z.; Wei, W.; et al. Simultaneously enhancing strength, ductility, and electrical conductivity in Cu-1Cr-0.1Zr alloy by heterogeneous microstructure. Mater. Sci. Eng. A. 2024, 918, 147473.
64. Liu, H.; Gao, B.; Yang, Y.; et al. Strain hardening behavior and microstructure evolution of gradient-structured Cu-Al alloys with low stack fault energy. J. Mater. Res. Technol. 2022, 19, 220-9.
65. Ding, X.; Yang, Z.; Yang, Y.; Sun, R. Structural optimization strategies for improving the maximum strength of gradient nanotwinned metals. Mechan. Mater. 2024, 189, 104876.
66. Li, X.; Lu, L.; Li, J.; Zhang, X.; Gao, H. Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys. Nat. Rev. Mater. 2020, 5, 706-23.
67. Li, W.; Tao, N.; Lu, K. Fabrication of a gradient nano-micro-structured surface layer on bulk copper by means of a surface mechanical grinding treatment. Scr. Mater. 2008, 59, 546-9.
68. Shao, C.; Zhang, P.; Wang, X.; Wang, Q.; Zhang, Z. High-cycle fatigue behavior of TWIP steel with graded grains: breaking the rule of mixture. Mater. Res. Lett. 2018, 7, 26-32.
69. Cai, S.; Wan, J.; Hao, Y.; Koch, C. Dual gradient microstructure to simultaneously improve strength and electrical conductivity of aluminum wire. Mater. Sci. Eng. A. 2020, 783, 139308.
70. Yang, L.; Chen, Z.; Ma, X.; et al. Improvement of strength and ductility in a gradient structured Ni fabricated by severe torsion deformation. Mater. Sci. Eng. A. 2021, 826, 141980.
71. Chen, G.; Qiao, J.; Jiao, Z.; et al. Strength-ductility synergy of Al0.1CoCrFeNi high-entropy alloys with gradient hierarchical structures. Scr. Mater. 2019, 167, 95-100.
72. Ren, C.; Wang, Q.; Zhang, Z.; Yang, H.; Zhang, Z. Surface strengthening behaviors of pure Cu with heterogeneous microstructures. Mater. Sci. Eng. A. 2018, 727, 192-9.
73. Chen, W.; You, Z.; Tao, N.; Jin, Z.; Lu, L. Mechanically-induced grain coarsening in gradient nano-grained copper. Acta. Mater. 2017, 125, 255-64.
74. Lee, H. H.; Hwang, K. J.; Park, H. K.; Kim, H. S. Effect of processing route on microstructure and mechanical properties in single-roll angular-rolling. Materials 2020, 13, 2471.
75. Chen, L.; Cao, T.; Wei, R.; et al. Gradient structure design to strengthen carbon interstitial Fe40Mn40Co10Cr10 high entropy alloys. Mater. Sci. Eng. A. 2020, 772, 138661.
76. Mao, Q.; Liu, Y.; Zhao, Y. A review on mechanical properties and microstructure of ultrafine grained metals and alloys processed by rotary swaging. J. Alloys. Compd. 2022, 896, 163122.
77. Mao, Q.; Chen, X.; Li, J.; Zhao, Y. Nano-gradient materials prepared by rotary swaging. Nanomaterials 2021, 11, 2223.
78. Guo, F.; Wang, Y.; Wang, M.; et al. Hetero-deformation induced strengthening and toughening of pure iron with inverse and multi-gradient structures. Mater. Sci. Eng. A. 2020, 782, 139256.
79. Zhilyaev, A. P.; Langdon, T. G. Using high-pressure torsion for metal processing: fundamentals and applications. Prog. Mater. Sci. 2008, 53, 893-979.
80. Zhang, X.; Yuan, L.; Lei, Y.; et al. Electrochemical gradients driven 3D printing of nano-twinned copper structures by direct current dynamic meniscus confined electrodeposition. Appl. Mater. Today. 2021, 24, 101138.
81. Liu, Q.; Ren, C.; Song, Z.; et al. High-strength and high-conductivity additively manufactured Cu-O alloy enabled by cellular microstructure. Addit. Manuf. 2024, 88, 104244.
82. Pelatti, S.; Benedetti, S.; Ammirati, G.; et al. Niobium oxide films with variable stoichiometry: structure, morphology, and ultrafast dynamics. J. Phys. Chem. C. Nanomater. Interfaces. 2025, 129, 8206-14.
83. Pattanayak, M.; Hoque, M. N. F.; Ho, Y.; Li, W.; Fan, Z.; Bernussi, A. A. Ultrahigh tunability of resistive switching in strongly correlated functional oxide. Appl. Mater. Today. 2023, 30, 101642.
84. Naik, J. M.; Bulfin, B.; Triana, C. A.; Stoian, D. C.; Patzke, G. R. Cation-deficient Ce-substituted perovskite oxides with dual-redox active sites for thermochemical applications. ACS. Appl. Mater. Interfaces. 2023, 15, 806-17.
85. Diatta, A.; Colin, C. V.; Viennois, R.; et al. BaCoO2 with tetrahedral cobalt coordination: the missing element to understand energy storage and conversion applications in BaCoO3-δ-based materials. J. Am. Chem. Soc. 2024, 146, 15027-35.
86. Huang, T.; Liu, C.; Wang, J.; et al. Metallic aluminum suboxides with ultrahigh electrical conductivity at high pressure. Research 2022, 2022, 9798758.
87. Mara, N. A.; Beyerlein, I. J. Interface-dominant multilayers fabricated by severe plastic deformation: Stability under extreme conditions. Curr. Opin. Solid. State. Mat. Sci. 2015, 19, 265-76.
88. Liu, J.; Wu, Y.; Gao, H.; Kong, C.; Yu, H. Enhanced mechanical properties and thermal stability of accumulative roll-bonded Cu/Nb multilayer composites via cryorolling. Metall. Mater. Trans. A. 2022, 54, 16-22.
89. You, C.; Zeng, L.; Gao, R.; Zhang, X.; Wang, H. A dual heterogeneous laminated microstructure design for improving the mechanical properties and electrical conductivity of copper alloys. Mater. Charact. 2022, 187, 111878.
90. Han, T.; Hou, C.; Zhao, Z.; et al. Simultaneous enhancement of strength and conductivity via self-assembled lamellar architecture. Nat. Commun. 2024, 15, 1863.
91. Yang, K.; Li, Q.; Zhang, Q.; et al. Synergistically enhanced interface stability by graphene assisted copper surface reconstruction. Acta. Mater. 2022, 226, 117638.
92. Eslami, A. H.; Zebarjad, S. M.; Moshksar, M. M. Study on mechanical and magnetic properties of Cu/Ni multilayer composite fabricated by accumulative roll bonding process. Mater. Sci. Technol. 2013, 29, 1000-5.
93. Eizadjou, M.; Kazemitalachi, A.; Daneshmanesh, H.; Shakurshahabi, H.; Janghorban, K. Investigation of structure and mechanical properties of multi-layered Al/Cu composite produced by accumulative roll bonding (ARB) process. Compos. Sci. Technol. 2008, 68, 2003-9.
94. Jiang, S.; Jia, N.; Zhou, X.; Zhang, H.; He, T.; Zhao, X. Microstructure and mechanical properties of multilayered Cu/Ti composites fabricated by accumulative roll bonding. Mater. Trans. 2017, 58, 259-65.
95. Cao, M.; Xiong, D. B.; Yang, L.; et al. Ultrahigh electrical conductivity of graphene embedded in metals. Adv. Funct. Mater. 2019, 29, 1806792.
96. He, S.; Liu, B.; Zhao, T.; Zhang, X.; Wang, K.; Xiong, D. Electrical conductivity of graphene/copper composites at lattice scale. Comput. Mater. Sci. 2024, 245, 113314.
97. Jiang, B.; Liu, C.; Dai, B.; Pei, Z.; Liu, B.; Wang, Y. Improved strength-plasticity-conductivity of graphene/copper layered composites by vacuum hot rolling. J. Mater. Res. Technol. 2024, 31, 1991-2002.
98. Samal, A.; Kushwaha, A. K.; Das, D.; Sahoo, M. R.; Lanzillo, N. A.; Nayak, S. K. Thermal and electrical conductivity of copper‐graphene heterosystem: an effect of strain and thickness. Adv. Eng. Mater. 2023, 25, 2201192.
99. Lai, Z.; Mai, Y.; Song, H.; Mai, J.; Jie, X. Heterogeneous microstructure enables a synergy of strength, ductility and electrical conductivity in copper alloys. J. Alloys. Compd. 2022, 902, 163646.
100. Zheng, Y.; Niu, J.; Lu, Y.; et al. High strength and high conductivity pure copper prepared by ECAP-Conform combined with cryogenic rolling and recrystallization annealing. J. Mater. Res. Technol. 2025, 36, 3192-204.
101. Zhong, R.; Zhang, W.; Zhao, C.; Luo, Z.; Dong, H. Achieving an ultrastrong yet ductile copper alloy via microstructural heterogeneity with dense ordered nanoprecipitates. Mater. Res. Lett. 2025, 13, 875-84.
102. Zhang, X. H.; Yuan, H. X.; Huang, F.; et al. Enhanced strength-plasticity synergy of copper composites by designing uniformly dispersed yttria nanoparticles and a heterogeneous grain structure. Rare. Metals. 2024, 43, 6704-16.
103. Li, B.; Gao, Y.; Li, C.; et al. Microstructural characteristics, electrical conductivity and mechanical properties of Cu matrix composites reinforced with dual-phase borides. J. Mater. Res. Technol. 2025, 34, 1-14.
104. Ma, S.; Zhang, Q.; Fan, J.; et al. Excellent combination of strength, conductivity and ductility realized in a dilute Cu-Cr-Zr alloy by coherent nanoprecipitates. Mater. Sci. Eng. A. 2023, 885, 145614.
105. Han, J.; Wu, Y.; Zhao, K.; Liu, S.; Gao, T.; Liu, X. Effect of boron on aging strengthened phase and properties of Cu-Cr-Zr alloy. J. Mater. Res. Technol. 2022, 19, 532-41.
106. Hu, J.; Tian, Y.; Yu, H.; et al. Optimizing strength and electrical conductivity of Cu-Cr-Zr alloy by two-stage aging treatment. Mater. Lett. 2022, 315, 131937.
107. Xu, Z.; Shi, H.; Liu, S.; et al. Effect of aging temperature on microstructure and properties of cold-rolled Cu-Ni-Si alloy. Mater. Today. Commun. 2024, 40, 109438.
108. Liang, J.; Xie, G.; Liu, F.; Xue, W.; Wang, R.; Liu, X. Optimizing the overall performance of Cu-Ni-Si alloy via controlling nanometer-lamellar discontinuous precipitation structure. Int. J. Miner. Metall. Mate. 2025, 32, 915-24.
109. Jia, Y.; Pang, Y.; Yi, J.; Lei, Q.; Li, Z.; Xiao, Z. Effects of pre-aging on microstructure and properties of Cu-Ni-Si alloys. J. Alloys. Compd. 2023, 942, 169033.
110. Han, S. Z.; Lim, S. H.; Kim, S.; et al. Increasing strength and conductivity of Cu alloy through abnormal plastic deformation of an intermetallic compound. Sci. Rep. 2016, 6, 30907.
111. Rouxel, B.; Cayron, C.; Bornand, J.; Sanders, P.; Logé, R. E. Micro-addition of Fe in highly alloyed Cu-Ti alloys to improve both formability and strength. Mater. Des. 2022, 213, 110340.
112. Wei, H.; Wei, H. L.; Du, H. Y.; Wang, Q.; Zhou, C. Z. Mechanism of property enhancement of Cu-Ti alloys via microalloying with Cr and Mg elements. Trans. Nonferrous. Met. Soc. China. 2025, 35, 1233-48.
113. Tu, Y.; Wang, W.; Liu, X.; Feng, Q. The compositional homogenization control of Cu-Ti alloys prepared by accumulative roll bonding-deformation diffusion process. J. Alloys. Compd. 2022, 924, 166587.
114. Liu, Y.; Chen, J.; Li, Z.; Wang, X.; Zhang, P.; Liu, J. AlCoCrFeNi high entropy alloy reinforced Cu-based composite with high strength and ductility after hot extrusion. Vacuum 2021, 184, 109882.
115. Wu, J.; Tang, X.; Zhang, X.; et al. Realizing the combination of high strength and good ductility of Cu matrix composites with CrCoNi reinforcement particles and microlaminated structure. J. Alloys. Compd. 2021, 872, 159632.
116. Wang, S.; Xie, G.; Yang, J.; Liu, F.; Liu, X. Analysis of microstructure evolution and deformation mechanism of nano-oxides Al2O3 dispersion strengthened copper alloy during compression at room temperature. J. Alloys. Compd. 2023, 949, 169837.
117. Zhao, S.; Song, G.; Zhang, T. Microstructures, electrical and mechanical properties of an ODS-Cu alloy containing multi-scale complex oxides. Mater. Sci. Eng. A. 2024, 890, 145905.
118. Zhang, X.; Sun, G.; Zhang, P.; et al. Effects of interfacial coherency on the high-temperature strengthening in the dispersion-strengthened Cu matrix composite. Compos. Commun. 2025, 54, 102274.
119. Pan, S.; Zheng, T.; Yao, G.; Chi, Y.; De, Rosa. I.; Li, X. High-strength and high-conductivity in situ Cu-TiB2 nanocomposites. Mater. Sci. Eng. A. 2022, 831, 141952.
120. Li, Y.; Liu, S.; Yan, Q.; et al. Achieving high strength, high ductility and high conductivity of additively manufactured CuCrZr alloy via control of powder bed temperature. Mater. Sci. Eng. A. 2025, 930, 148114.
121. Guo, X.; Xu, G.; Li, S.; et al. Enhanced plastic deformation ability of copper matrix composites through synergistic strengthening of nano-Al2O3 and Cr particles. Mater. Sci. Eng. A. 2024, 910, 146886.
122. Li, Y.; Chen, C.; Sun, W.; et al. Synergistic enhancement of strength-ductility in ODS copper alloy by exploring heterogeneous structure. Mater. Sci. Eng. A. 2025, 931, 148194.
123. Edalati, K.; Ahmed, A. Q.; Akrami, S.; et al. Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: an interdisciplinary review. J. Alloys. Compd. 2024, 1002, 174667.
124. Romero-Resendiz, L.; Naeem, M.; Zhu, Y. T. Heterostructured materials by severe plastic deformation: overview and perspectives. Mater. Trans. 2023, 64, 2346-60.
125. Edalati, K.; Horita, Z. Recent research trends in severe plastic deformation of metallic and non-metallic materials. Mater. Trans. 2025, 66, 450-61.
126. Hernández-escobar, D.; Kawasaki, M.; Boehlert, C. J. Metal hybrids processed by high-pressure torsion: synthesis, microstructure, mechanical properties and developing trends. Int. Mater. Rev. 2021, 67, 231-65.
127. Jin, X.; Wang, Z.; Hu, H.; Sun, K.; Liu, Y.; Liu, Y. Ultra-high conductive copper with micron-grain and nano-twin microstructures prepared by electrodeposition. J. Alloys. Compd. 2025, 1036, 181805.
128. Zhang, P.; Zhang, L.; Qu, X. Anomalous vertical twins with high (2 2 0) texture in direct current electroplating copper film. Appl. Surf. Sci. 2023, 638, 158102.
129. Su, G.; Gao, J.; Liu, X.; et al. High-efficiency and low-consumption preparation of ultra-thin and high-performance nanotwinned copper foils by high-gravity intensified direct current electrodeposition. Chem. Eng. Sci. 2024, 296, 120248.
130. Chen, K. X.; Gao, L. Y.; Li, Z.; Sun, R.; Liu, Z. Q. Research progress of electroplated nanotwinned copper in microelectronic packaging. Materials 2023, 16, 4614.
131. Park, S. W.; Eom, H. W.; Kim, M. J.; Kim, J. J. Electrodeposition of nano-twinned Cu and their applications in electronics. J. Electrochem. Soc. 2022, 169, 112503.
132. Tang, X.; Chen, X.; Sun, F.; Liu, P.; Zhou, H.; Fu, S. The current state of CuCrZr and CuCrNb alloys manufactured by additive manufacturing: a review. Mater. Des. 2022, 224, 111419.
133. Campagnoli M, Galati M, Saboori A. On the processability of copper components via powder-based additive manufacturing processes: potentials, challenges and feasible solutions. J. Manuf. Process. 2021, 72, 320-37.
134. Jadhav, S. D.; Goossens, L. R.; Kinds, Y.; Hooreweder, B. V.; Vanmeensel, K. Laser-based powder bed fusion additive manufacturing of pure copper. Addit. Manuf. 2021, 42, 101990.
135. Liu, Y.; Zhang, J.; Niu, R.; et al. Manufacturing of high strength and high conductivity copper with laser powder bed fusion. Nat. Commun. 2024, 15, 1283.
136. Bu, X.; Lei, Q.; Zhang, X.; et al. Effect of process parameters and heat treatment on the microstructure and properties of a Cu-Cr-Si alloy manufactured by laser powder bed fusion. Mater. Sci. Eng. A. 2025, 927, 147966.
137. Jiang, H.; Li, Y.; Jiang, L.; et al. High strength and high conductivity Cu-Ta composites fabricated by powder metallurgy. Mater. Today. Commun. 2024, 38, 108183.
138. Singh, K.; Khanna, V.; Chaudhary, V.; Jasrotia, R.; Prakash, C.; Al-Kahtani, A. A. Investigating the potential of powder metallurgy for fabricating graphene nanoplatelets reinforced copper nanocomposites. J. Mater. Res. Technol. 2024, 31, 1258-69.
139. Wang, Y.; Zhuo, L.; Yin, E. Progress, challenges and potentials/trends of tungsten-copper (W Cu) composites/pseudo-alloys: fabrication, regulation and application. Int. J. Refract. Met. Hard. Mat. 2021, 100, 105648.
140. Guo, J.; He, Q.; Mei, Q.; Huang, X.; Wu, G.; Mishin, O. Gradient microstructure, recrystallization and mechanical properties of copper processed by high pressure surface rolling. J. Mater. Sci. Technol. 2022, 126, 182-90.
141. Lin, H.; Tian, Y.; Sun, S.; Zhang, Z.; Zhang, Z. Tuning the mechanical properties of copper by changing deformation temperature and recrystallization fraction. Mater. Sci. Eng. A. 2022, 853, 143734.
142. Wang, J.; Misra, A. Plastic homogeneity in nanoscale heterostructured binary and multicomponent metallic eutectics: an overview. Curr. Opin. Solid. State. Mat. Sci. 2023, 27, 101055.
143. Zhu, K.; Huang, J.; Nie, W.; et al. Ultrahigh yield strength heterostructured titanium matrix composites by controlling the α/α′ precipitation sequence. J. Alloys. Compd. 2024, 1004, 175886.
144. Zhao, Y.; Wang, M.; Lei, Y.; Fan, Y.; Xue, A.; Lin, X. Fabrication of heterostructured Ti alloys with exceptional strength and ductility by direct laser deposition. J. Mater. Res. Technol. 2024, 28, 1597-610.
145. Mao, X.; Wang, L.; Sun, G.; Zhang, X.; Fu, Y.; Dong, L. Introducing β-Ti ductile-zones for enhancing both strength and ductility in heterostructured titanium alloy composites. Mater. Res. Lett. 2024, 13, 165-74.
146. Wu, R.; Choi, Y. T.; Wu, Q.; et al. Enhanced strength-ductility synergy in a gradient pseudo-precipitates heterostructured Al-2.5%Mg alloy: design, fabrication, and deformation mechanism. J. Mater. Sci. Technol. 2024, 196, 88-100.
147. Nie, J.; Chen, Y.; Song, L.; et al. Enhancing strength and ductility of Al-matrix composite via a dual-heterostructure strategy. Int. J. Plast. 2023, 171, 103825.
148. Shen, J.; Choi, Y. T.; Yang, J.; et al. Fabrication of spatially-variable heterostructured CoCrFeMnNi high entropy alloy by laser processing. Mater. Sci. Eng. A. 2024, 896, 146272.
149. Tung, S.; Hsu, T.; Zhu, Y.; Tsai, M. Recrystallized hard zone and resultant tri-modal microstructure produces superior mechanical properties in a single-phase heterostructured high-entropy alloy. Acta. Mater. 2024, 273, 119957.
150. Ai, W.; Lin, Y.; Chen, F. Microstructure and mechanical properties of Ti-Mg lightweight heterostructured materials. Mater. Sci. Eng. A. 2022, 850, 143560.
151. Nie, J. F.; Wu, Y. L.; Xie, K. W.; Liu, X. F. Microstructure and thermal stability of heterostructured Al-AlN nanocomposite. Acta. Metall. Sin. 2022, 58, 1497-1508.
