REFERENCES
1. Gao, Y.; Pan, Z.; Sun, J.; Liu, Z.; Wang, J. High-energy batteries: beyond lithium-ion and their long road to commercialisation. Nanomicro. Lett. 2022, 14, 94.
2. Thakur, J.; Phogat, P. S. H. R. E. Y. A.; Jha, R.; Singh, S. Non-rechargeable batteries: a review of primary battery technology and future trends. Phys. Chem. Chem. Phys. 2025, 27, 4045-77.
3. Miao, J.; Lang, Z.; Xue, T.; et al. Revival of zeolite-templated nanocarbon materials: recent advances in energy storage and conversion. Adv. Sci. (Weinh). 2020, 7, 2001335.
4. Ye, Z.; Jiang, Y.; Li, L.; Wu, F.; Chen, R. Rational design of MOF-based materials for next-generation rechargeable batteries. Nanomicro. Lett. 2021, 13, 203.
5. Yang, Y.; Wang, W.; Meng, G.; Zhang, J. Function-directed design of battery separators based on microporous polyolefin membranes. J. Mater. Chem. A. 2022, 10, 14137-70.
6. Huang, X.; He, R.; Li, M.; Chee, M. O. L.; Dong, P.; Lu, J. Functionalized separator for next-generation batteries. Mater. Today. 2020, 41, 143-55.
7. Xing, J.; Li, J.; Fan, W.; et al. A review on nanofibrous separators towards enhanced mechanical properties for lithium-ion batteries. Compos. Part. B-Eng. 2022, 243, 110105.
8. Wu, Y.; Wu, Q.; Sun, M.; Zeng, Z.; Cheng, S.; Xie, J. Enhancing safety in lithium batteries: a review on functional separators controlling substance and heat during thermal runaway. Adv. Funct. Mater. 2025, 35, 2425698.
9. Hu, W.; Fu, W.; Jhulki, S.; et al. Heat-resistant Al2O3 nanowire-polyetherimide separator for safer and faster lithium-ion batteries. J. Mater. Sci. Technol. 2023, 142, 112-20.
10. Tang, H.; Yue, L.; Mu, X.; Xia, H.; Zhou, H. Phosphorus-based anodes for fast-charging lithium-ion batteries: advances, challenges and prospects. Energy. Mater. 2025, 5, 500151.
11. Permatasari, A.; So, M.; Nguyen, V. L.; Yano, T.; Inoue, G. Porosity and tortuosity dynamics and their impact on lithium-ion battery performance with different separator structures. J. Power. Sources. 2025, 647, 237278.
12. Wang, W.; Hao, F.; Mukherjee, P. P. Mechanistics of lithium-metal battery performance by separator architecture design. ACS. Appl. Mater. Interfaces. 2020, 12, 556-66.
13. Ji, Y.; Yang, C.; Han, J.; He, W. Functional separators for modulating Li-ion flux toward uniform Li deposition: a review. Adv. Energy. Mater. 2024, 14, 2402329.
14. Wang, Y.; Chang, X.; Li, Z.; et al. Preventing sudden death of high-energy lithium-ion batteries at elevated temperature through interfacial ion-flux rectification. Adv. Funct. Mater. 2022, 33, 2208329.
15. Zhao, S.; Ma, M.; Gao, L.; et al. Engineering the Li-ion flux and interfacial chemistry toward a stable Li metal anode via a simple separator coating strategy. New. J. Chem. 2023, 47, 7986-94.
16. Hamenu, L.; Mohammed, L.; Attah, J.; et al. LiNi1/3Mn1/3Co1/3O2/graphite cells adopting polyolefin and non-polyolefin separators for potential application in industrial manufacturing of energy storage devices. Electrochem. Commun. 2024, 158, 107644.
17. Zheng, S.; Mo, L.; Chen, K.; et al. Precise control of Li+ directed transport via electronegative polymer brushes on polyolefin separators for dendrite-free lithium deposition. Adv. Funct. Mater. 2022, 32, 2201430.
18. Lei, S.; Zeng, Z.; Liu, M.; Zhang, H.; Cheng, S.; Xie, J. Balanced solvation/de-solvation of electrolyte facilitates Li-ion intercalation for fast charging and low-temperature Li-ion batteries. Nano. Energy. 2022, 98, 107265.
19. Liao, L.; Wang, F.; He, J.; Ma, L.; Liu, Q.; Deng, Y. Ultrathin TA‐MXene modification layer with sub-nanometer interlayer channels suppresses polysulfide shuttling and accelerates Li+ desolvation. Adv. Funct. Mater. 2025, 36, e12612.
20. Yao, S.; Yang, Y.; Liang, Z.; et al. A dual-functional cationic covalent organic frameworks modified separator for high energy lithium metal batteries. Adv. Funct. Mater. 2023, 33, 2212466.
21. Huang, X.; Ellison, N. Fabricating a high performance composite separator with a small thickness for lithium ion batteries. Compos. Sci. Technol. 2018, 168, 346-52.
22. Lingappan, N.; Lee, W.; Passerini, S.; Pecht, M. A comprehensive review of separator membranes in lithium-ion batteries. Renew. Sust. Energ. Rev. 2023, 187, 113726.
23. Pan, R.; Wang, Z.; Sun, R.; et al. Thickness difference induced pore structure variations in cellulosic separators for lithium-ion batteries. Cellulose 2017, 24, 2903-11.
24. Yu, Y.; Liu, M.; Chen, Z.; et al. Advances in nonwoven-based separators for lithium-ion batteries. Adv. Fiber. Mater. 2023, 5, 1827-51.
25. Zahn, R.; Lagadec, M. F.; Hess, M.; Wood, V. Improving ionic conductivity and lithium-ion transference number in lithium-ion battery separators. ACS. Appl. Mater. Interfaces. 2016, 8, 32637-42.
26. Zhu, G.; He, Y.; Deng, Y.; et al. Dependence of separator thickness on Li-ion battery energy density. J. Electrochem. Soc. 2021, 168, 110545.
27. Liu, S.; Cheng, S.; Huang, C.; et al. Nanoporous aramid nanofiber separators with high modulus and thermal stability for safe lithium-ion batteries. Small 2024, 20, e2404639.
28. Liu, Y.; Li, C.; Li, C.; et al. Porous, robust, thermally stable, and flame retardant nanocellulose/polyimide separators for safe lithium-ion batteries. J. Mater. Chem. A. 2023, 11, 23360-9.
29. Song, Y.; Liu, X.; Ren, D.; et al. Simultaneously blocking chemical crosstalk and internal short circuit via gel-stretching derived nanoporous non-shrinkage separator for safe lithium-ion batteries. Adv. Mater. 2022, 34, e2106335.
30. Wang, Y.; Guo, M.; Fu, H.; et al. Thermotolerant separator of cross-linked polyimide fibers with narrowed pore size for lithium-ion batteries. J. Membr. Sci. 2022, 662, 121004.
31. Sheng, L.; Song, L.; Gong, H.; et al. Polyethylene separator grafting with polar monomer for enhancing the lithium-ion transport property. J. Power. Sources. 2020, 479, 228812.
32. Sheng, L.; Wang, Q.; Liu, X.; et al. Suppressing electrolyte-lithium metal reactivity via Li+-desolvation in uniform nano-porous separator. Nat. Commun. 2022, 13, 172.
33. Xiao, S.; Fu, Q.; Wang, X.; et al. Polar-rich-group triazine-based covalent organic frameworks modified separators with de-solvation effect enables uniform Li deposition for stable lithium-metal anode. J. Energy. Chem. 2025, 105, 823-34.
34. Ma, H.; Yu, J.; Chen, M.; et al. Amino-enabled desolvation sieving effect realizes dendrite-inhibiting thin separator for durable aqueous zinc-ion batteries. Adv. Funct. Mater. 2023, 33, 2307384.
35. Subramanyan, K.; Jyothilakshmi, S.; Ulaganathan, M.; Lee, Y.; Aravindan, V. An efficient upcycling of graphite anode and separator for Na-ion Batteries via solvent-co-intercalation process. Carbon 2024, 216, 118525.
36. Choi, S.; Hassan, S. Z.; Roh, Y.; et al. Comprehensive crosslinking strategy using fluorinated azide to enhance the thermal stability of ceramic-coated separators for Li-ion batteries. Chem. Eng. J. 2024, 498, 155238.
37. Luo, M.; Zhang, X.; Wang, S.; et al. A thermal-ball-valve structure separator for highly safe lithium-ion batteries. Small 2024, 20, e2309523.
38. Shen, X.; Zhang, L.; Zhu, J.; Duan, X. Super electrolyte-philic all-inorganic ceramic separators for highly robust lithium batteries. Energy. Storage. Mater. 2025, 80, 104389.
39. Wei, Z.; Zhang, N.; Feng, T.; Wu, F.; Zhao, T.; Chen, R. A copolymer microspheres-coated separator to enhance thermal stability of lithium-sulfur batteries. Chem. Eng. J. 2022, 430, 132678.
40. Sun, S.; Rui, B.; Tan, X.; Bahuguna, S.; Zhou, J.; Xu, J. Effects of electrolyte, state of charge, and strain rate on the mechanical properties of lithium-ion battery electrodes and separators. J. Mater. Chem. A. 2025, 13, 20673-87.
41. Wang, S.; Ma, Z.; Zhao, W.; et al. Temperature-shift-induced mechanical property evolution of lithium-ion battery separator using cyclic nanoindentation. ACS. Appl. Mater. Interfaces. 2022, 14, 47578-86.
42. Zhao, Q.; Wu, X.; Li, S.; et al. Boosting thermal and mechanical properties: achieving high-safety separator chemically bonded with nano TiN particles for high performance lithium-ion batteries. Small 2023, 19, e2300378.
43. Pandey, A.; Rawat, K.; Phogat, P. Shreya; Jha, R.; Singh, S. Next-generation energy storage: a deep dive into experimental and emerging battery technologies. J. Alloys. Compd. 2025, 1014, 178781.
44. Rodrigues-marinho, T.; Miranda, D.; Barbosa, J. C.; Gonçalves, R.; Lanceros-Méndez, S.; Costa, C. M. Separator membranes for aqueous zinc-manganese oxide batteries: a comprehensive review on experimental results and theoretical simulations. Sustain. Energ. Fuels. 2025, 9, 1432-46.
45. Chek, Y. W.; Lee, P. K.; Yu, J. N.; Wang, B.; Ang, D. T. Review - separators for rechargeable alkaline zinc batteries: challenges and progress. J. Electrochem. Soc. 2025, 172, 020509.
46. Francis, C. F. J.; Kyratzis, I. L.; Best, A. S. Lithium-ion battery separators for ionic-liquid electrolytes: a review. Adv. Mater. 2020, 32, e1904205.
47. Zhong, S.; Yuan, B.; Guang, Z.; et al. Recent progress in thin separators for upgraded lithium ion batteries. Energy. Storage. Mater. 2021, 41, 805-41.
48. Liu, Q.; Yu, Z.; Hu, Y.; Tang, M.; Zhang, Q.; Ye, M. Designing advanced separators toward lithium-ion batteries. Adv. Energy. Mater. 2025, 15, e03217.
49. Heidari, A. A.; Mahdavi, H. Recent development of polyolefin-based microporous separators for Li-ion batteries: a review. Chem. Rec. 2020, 20, 570-95.
50. Dai, X.; Zhang, X.; Wen, J.; et al. Research progress on high-temperature resistant polymer separators for lithium-ion batteries. Energy. Storage. Mater. 2022, 51, 638-59.
51. Li, H.; Wang, H.; Xu, Z.; et al. Thermal-responsive and fire-resistant materials for high-safety lithium-ion batteries. Small 2021, 17, e2103679.
52. Xing, J.; Bliznakov, S.; Bonville, L.; Oljaca, M.; Maric, R. A review of nonaqueous electrolytes, binders, and separators for lithium-ion batteries. Electrochem. Energy. Rev. 2022, 5, 14.
53. Zhang, Y.; Lu, J.; Jin, Z.; et al. Covalently anchoring an ultrathin conformal SiOx coating on polyolefin separator for enhanced lithium metal battery performance. Adv. Funct. Mater. 2024, 35, 2417160.
54. Liu, Z.; Peng, Y.; Meng, T.; Yu, L.; Wang, S.; Hu, X. Thermal-triggered fire-extinguishing separators by phase change materials for high-safety lithium-ion batteries. Energy. Storage. Mater. 2022, 47, 445-52.
55. Wu, D.; Dong, N.; Wang, R.; Qi, S.; Liu, B.; Wu, D. In situ construction of high-safety and non-flammable polyimide “ceramic” lithium-ion battery separator via SiO2 nano-encapsulation. Chem. Eng. J. 2021, 420, 129992.
56. Zhu, J.; Huang, L.; Xu, L.; et al. Bio-based furan aramid/ceramic-coated lithium-ion battery separators with high ionic conductivity, wettability and safety via in situ lithium compensation strategy. J. Energy. Chem. 2026, 114, 630-8.
57. Lin, D.; Zhuo, D.; Liu, Y.; Cui, Y. All-integrated bifunctional separator for Li dendrite detection via novel solution synthesis of a thermostable polyimide separator. J. Am. Chem. Soc. 2016, 138, 11044-50.
58. Liao, T.; Huang, S.; Wang, L.; Liu, W.; Wang, X.; Zhang, W. Biomimetic ultrathin cellulose composite separators for high-performance lithium-sulfur batteries. Adv. Funct. Mater. 2025, 36, e19474.
59. Weng, Y. T.; Liu, H. W.; Pei, A.; et al. An ultrathin ionomer interphase for high efficiency lithium anode in carbonate based electrolyte. Nat. Commun. 2019, 10, 5824.
60. Tan, R.; He, H.; Wang, A.; et al. Interfacial engineering of polymer membranes with intrinsic microporosity for dendrite-free zinc metal batteries. Angew. Chem. Int. Ed. Engl. 2024, 63, e202409322.
61. Mckeown, N. B. The synthesis of polymers of intrinsic microporosity (PIMs). Sci. China. Chem. 2017, 60, 1023-32.
62. Lee, H.; Yanilmaz, M.; Toprakci, O.; Fu, K.; Zhang, X. A review of recent developments in membrane separators for rechargeable lithium-ion batteries. Energy. Environ. Sci. 2014, 7, 3857-86.
63. Costa, C. M.; Lee, Y.; Kim, J.; Lee, S.; Lanceros-méndez, S. Recent advances on separator membranes for lithium-ion battery applications: from porous membranes to solid electrolytes. Energy. Storage. Mater. 2019, 22, 346-75.
64. Manly, A. J.; Tenhaeff, W. E. One-step fabrication of robust lithium ion battery separators by polymerization-induced phase separation. J. Mater. Chem. A. 2022, 10, 10557-68.
65. Su, M.; Huang, G.; Wang, S.; Wang, Y.; Wang, H. High safety separators for rechargeable lithium batteries. Sci. China. Chem. 2021, 64, 1131-56.
66. Fan, Z.; Chen, X.; Shi, J.; et al. Functionalized separators boosting electrochemical performances for lithium batteries. Nanomicro. Lett. 2025, 17, 128.
67. Ko, Y.; Jung, H. Y.; Jung, H. W.; Ko, S. M.; Lee, J. T.; You, J. A new strategy for accelerating redox kinetics in lithium-ion batteries: highly porous poly(ethylene glycol)/nanocellulose separators. Carbohydr. Polym. 2025, 356, 123372.
68. Liu, F.; Chuan, X. Recent developments in natural mineral-based separators for lithium-ion batteries. RSC. Adv. 2021, 11, 16633-44.
69. Babiker, D. M.; Usha, Z. R.; Wan, C.; Hassaan, M. M. E.; Chen, X.; Li, L. Recent progress of composite polyethylene separators for lithium/sodium batteries. J. Power. Sources. 2023, 564, 232853.
70. Li, Z.; Jiao, S.; Yu, D.; et al. Cationic-polymer-functionalized separator as a high-efficiency polysulfide shuttle barrier for long-life Li-S battery. ACS. Appl. Energy. Mater. 2021, 4, 2914-21.
71. Yang, M.; Jue, N.; Chen, Y.; Wang, Y. Improving cyclability of lithium metal anode via constructing atomic interlamellar ion channel for lithium sulfur battery. Nanoscale. Res. Lett. 2021, 16, 52.
72. Waqas, M.; Ali, S.; Feng, C.; Chen, D.; Han, J.; He, W. Recent development in separators for high-temperature lithium-ion batteries. Small 2019, 15, e1901689.
73. l’Abee, R.; Darosa, F.; Armstrong, M. J.; Hantel, M. M.; Mourzagh, D. High temperature stable Li-ion battery separators based on polyetherimides with improved electrolyte compatibility. J. Power. Sources. 2017, 345, 202-11.
74. Yi, W. J.; Niu, B.; Hu, H.; et al. In-situ grafting strategy enables functional separator for advanced lithium-sulfur batteries. Small 2025, 21, e2407982.
75. Takeda, S.; Saito, Y.; Mukai, T.; Senoh, H.; Kaneko, I.; Yoshitake, H. Effect of the stretching process of polyethylene separators on rate capability of lithium-ion batteries. J. Phys. Chem. C. 2021, 125, 12496-503.
76. Hu, M.; Ma, Q.; Yuan, Y.; et al. Grafting polyethyleneimine on electrospun nanofiber separator to stabilize lithium metal anode for lithium sulfur batteries. Chem. Eng. J. 2020, 388, 124258.
77. Gu, M.; Lee, J.; Kim, Y.; et al. Inhibiting the shuttle effect in lithium-sulfur batteries using a layer-by-layer assembled ion-permselective separator. RSC. Adv. 2014, 4, 46940-6.
78. Trinh, H. N.; Eesaee, M.; Shahgaldi, S.; Singh, J.; Hoang, T. L. G.; Nguyen-Tri, P. Advancements and challenges in polymer-based separators for lithium-ion batteries. Energy. Storage. Mater. 2025, 77, 104153.
79. Li, B.; Liu, Y.; Han, X.; et al. Electrospun nanofiber surface-modified polyethylene separator for enhanced cycling stability and low-temperature performance of sodium-ion batteries. Chem. Eng. J. 2024, 501, 157803.
80. Mun, J.; Yim, T.; Gap Kwon, Y.; Jae Kim, K. Self-assembled nano-silica-embedded polyethylene separator with outstanding physicochemical and thermal properties for advanced sodium ion batteries. Chem. Eng. J. 2021, 405, 125844.
81. Luo, W.; Cheng, S.; Wu, M.; Zhang, X.; Yang, D.; Rui, X. A review of advanced separators for rechargeable batteries. J. Power. Sources. 2021, 509, 230372.
82. Wen, Z.; Tian, X.; Zhang, Y.; et al. The influence of separator thickness on the physical properties of separator and the electrochemical properties of lithium-ion battery. J. Electrochem. Soc. 2025, 172, 090506.
83. Jia, H.; Zeng, C.; Lim, H. S.; et al. Important role of ion flux regulated by separators in lithium metal batteries. Adv. Mater. 2024, 36, e2311312.
84. Ping, W.; Xue, B.; Zhang, F.; Huang, X.; Chen, L.; Xiang, H. Ultrathin cellulose composite separator for high-energy density lithium-ion batteries. Adv. Funct. Mater. 2025, 36, e09803.
85. Ouyang, D.; Chung, Y.; Liu, J.; et al. Characteristics and mechanisms of as well as evaluation methods and countermeasures for thermal runaway propagation in lithium-ion batteries. Progr. Energy. Combust. Sci. 2025, 108, 101209.
86. Hwang, Y.; Kim, M. Effect of a polypropylene separator with a thin electrospun ceramic/polymer coating on the thermal and electrochemical properties of lithium-ion batteries. Polymers. (Basel). 2024, 16.
87. Seo, J.; Im, J.; Kim, M.; Song, D.; Yoon, S.; Cho, K. Y. Recent progress of advanced functional separators in lithium metal batteries. Small 2024, 20, e2312132.
88. Gogia, A.; Wang, Y.; Rai, A. K.; Bhattacharya, R.; Subramanyam, G.; Kumar, J. Binder-free, thin-film ceramic-coated separators for improved safety of lithium-ion batteries. ACS. Omega. 2021, 6, 4204-11.
89. Manoharan, A.; Chong, J. J.; Choong, Z. J.; et al. Optimizing lithium-ion battery manufacturing with digitalization and AI-driven frameworks. Int. J. Adv. Manuf. Technol. 2025, 142, 1-37.
90. Örüm Aydin, A.; Zajonz, F.; Günther, T.; Dermenci, K.; Berecibar, M.; Urrutia, L. Lithium-ion battery manufacturing: industrial view on processing challenges, possible solutions and recent advances. Batteries 2023, 9, 555.
91. YAN, X.; HU, Z.; LIU, F.; et al. The origin and elimination of separator wrinkles in lithium-ion batteries. Energy. Storage. Sci. Technol. 2021, 10, 156.
92. Yang, T.; Xu, X.; Chen, S.; et al. A lithiophilic donor-acceptor polymer modified separator for high-performance lithium metal batteries. Angew. Chem. Int. Ed. Engl. 2025, 64, e202420973.
93. Cao, M.; Bu, F.; Liu, X.; Ng, C. H.; Guan, C. Beyond separation: multifunctional separators in rechargeable batteries. Adv. Energy. Mater. 2025, 15, 2502540.
94. Zhang, N.; Zhao, X.; Liu, G.; et al. Solid electrolyte membranes for all-solid-state rechargeable batteries. eTransportation 2024, 20, 100319.
95. Zhang, Y.; Bahi, A.; Ko, F.; Liu, J. Polyacrylonitrile-reinforced composite gel polymer electrolytes for stable potassium metal anodes. Small 2022, 18, e2107186.
96. Ma, Y.; Wang, C.; Yang, K.; et al. Ultrathin and robust composite electrolyte for stable solid-state lithium metal batteries. ACS. Appl. Mater. Interfaces. 2023, 15, 17978-85.
97. Likitaporn, C.; Prathumrat, P.; Senthilkumar, N.; Tanalue, N.; Wongsalam, T.; Okhawilai, M. Engineering the separators for high electrolyte uptakes in Li-ion batteries. Journal. of. Energy. Storage. 2024, 101, 113861.
98. Han, D.; Lee, J.; Bang, Y.; et al. Molecularly engineered membrane-driven interphase stabilization of electrodes for Li||NCM811 cells under practical operating conditions. Energy. Environ. Sci. 2025, 18, 10112-24.
99. Zhang, J.; Liu, Z.; Dang, C.; et al. From lab to industry: high-safety separators for lithium-ion/-metal batteries. Matter 2025, 8, 102101.
100. Mun, S. C.; Won, J. H. Manufacturing processes of microporous polyolefin separators for lithium-ion batteries and correlations between mechanical and physical properties. Crystals 2021, 11, 1013.
101. Sun, X.; Zhou, Y.; Li, D.; et al. A review of electrospun separators for lithium‐based batteries: progress and application prospects. Carbon. Energy. 2024, 6, e539.
102. Lee, S. H.; Kim, J.; Kim, B. H.; Yoon, S.; Cho, K. Y. Delamination-free multifunctional separator for long-term stability of lithium-ion batteries. Small 2019, 15, e1804980.
103. Liang, X.; Zhou, Y.; Liu, D.; Wang, H.; Sun, J.; Cai, X. Optimization polypropylene separator by ultrathin Ti0.6Fe0.4O2 nanosheet coating for Li-metal battery. J. Power. Sources. 2025, 640, 236765.
104. Shen, L.; Liu, X.; Dong, J.; et al. Functional lithiophilic polymer modified separator for dendrite-free and pulverization-free lithium metal batteries. J. Energy. Chem. 2021, 52, 262-8.
105. Ding, L.; Li, D.; Du, F.; Zhang, D.; Zhang, S.; Wu, T. Novel preparation of lithium‐ion battery wet‐processed separator based on the synergistic effect of porous skeleton nano-Al2O3 in situ blending and synchro‐draw. Polym. Int. 2022, 72, 61-70.
106. Lei, Y.; Xu, L.; Chan, Q. N.; et al. Recent advances in separator design for lithium metal batteries without dendrite formation: implications for electric vehicles. eTransportation 2024, 20, 100330.
107. Zhang, J.; Huang, H.; Zhang, G.; Dai, Z.; Wen, Y.; Jiang, L. Cycle life studies of lithium-ion power batteries for electric vehicles: a review. J. Energy. Storage. 2024, 93, 112231.
108. Guo, X.; Yang, Y.; Shi, C.; Xu, M.; Liu, Y.; Zou, D. Monitoring and control of internal temperature in power batteries: a comprehensive review. Energy. Storage. Mater. 2025, 75, 104051.
109. Gu, Q.; Xue, H.; Li, Z.; Song, J.; Sun, Z. High-performance polyethylene separators for lithium-ion batteries modified by phenolic resin. J. Power. Sources. 2021, 483, 229155.
110. Lin, C.; Ou, S.; Liu, B.; et al. Enhanced electrochemical performance of zinc-ion batteries using functionalized nano-chitin separators. Adv. Compos. Hybrid. Mater. 2025, 8, 218.
111. Cheng, L.; Zhang, Y.; Li, D.; et al. Cu‐MOF functionalized hydroxyapatite/bacterial cellulose composite separator enabling dendrite-free fast charging and enhanced thermal safety for high-loading graphite anode. Adv. Funct. Mater. 2025, 36, e15523.
112. Ju, Y.; Kim, B.; Youn, B.; Song, Y.; Jang, H.; Lee, D. Towards dendrite-free lithium-ion batteries: a comprehensive review of functional separator technologies. J. Energy. Storage. 2025, 127, 116957.
113. Li, Y.; Wang, Y.; Chen, B.; et al. Proactive lithium dendrite regulation enabled by manipulating separator microstructure using high-fidelity phase-field simulation. Adv. Energy. Mater. 2025, 15, 2500503.
114. Yi, X.; Yang, Y.; Song, J.; et al. Strategically tailored polyethylene separator parameters enable cost-effective, facile, and scalable development of ultra-stable liquid and all-solid-state lithium batteries. Energy. Storage. Mater. 2025, 77, 104191.
115. Zhao, D. Y.; Zhou, S.; Huang, Y. F.; et al. Simulation of the cation solvation structure of the electrolyte in separator nanopores of a lithium ion battery. J. Phys. Chem. B. 2025, 129, 6721-30.
116. Wang, Y.; Feng, X.; Huang, W.; He, X.; Wang, L.; Ouyang, M. Challenges and opportunities to mitigate the catastrophic thermal runaway of high-energy batteries. Adv. Energy. Mater. 2023, 13, 2203841.
117. Feng, X.; Ouyang, M.; Liu, X.; Lu, L.; Xia, Y.; He, X. Thermal runaway mechanism of lithium ion battery for electric vehicles: a review. Energy. Storage. Mater. 2018, 10, 246-67.
118. Wu, Y.; Xie, L.; Ming, H.; et al. an empirical model for the design of batteries with high energy density. ACS. Energy. Lett. 2020, 5, 807-16.
119. Liu, X.; Ren, D.; Hsu, H.; et al. Thermal runaway of lithium-ion batteries without internal short circuit. Joule 2018, 2, 2047-64.
120. Liu, Y.; Tian, Y.; Fu, Z.; et al. Thermite reaction-induced thermal runaway of lithium-ion batteries. Adv. Mater. 2025, 37, e10486.
121. Chen, G.; Tan, R.; Zeng, C.; et al. Developing safe and high-performance lithium-ion batteries: strategies and approaches. Prog. Mater. Sci. 2025, 154, 101516.
122. Feng, X.; Ren, D.; He, X.; Ouyang, M. Mitigating thermal runaway of lithium-ion batteries. Joule 2020, 4, 743-70.
123. Feng, X.; Zhang, F.; Huang, W.; Peng, Y.; Xu, C.; Ouyang, M. Mechanism of internal thermal runaway propagation in blade batteries. J. Energy. Chem. 2024, 89, 184-94.
124. Ding, M.; Feng, X.; Peng, Y.; et al. Electrolyte induced synergistic construction of cathode electrolyte interphase and capture of reactive free radicals for safer high energy density lithium-ion battery. J. Energy. Chem. 2023, 87, 207-14.
125. Ren, D.; Feng, X.; Liu, L.; et al. Investigating the relationship between internal short circuit and thermal runaway of lithium-ion batteries under thermal abuse condition. Energy. Storage. Mater. 2021, 34, 563-73.
126. Liu, L.; Feng, X.; Rahe, C.; et al. Internal short circuit evaluation and corresponding failure mode analysis for lithium-ion batteries. J. Energy. Chem. 2021, 61, 269-80.
127. Lai, X.; Jin, C.; Yi, W.; et al. Mechanism, modeling, detection, and prevention of the internal short circuit in lithium-ion batteries: recent advances and perspectives. Energy. Storage. Mater. 2021, 35, 470-99.
128. Zhao, L.; Hou, J.; Feng, X.; et al. The trade-off characteristic between battery thermal runaway and combustion. Energy. Storage. Mater. 2024, 69, 103380.
129. Chen, S.; Wei, X.; Wu, H.; et al. Multi-functional thermal barrier suppresses battery thermal runaway propagation and degradation. Renew. Sust. Energ. Rev. 2025, 223, 116056.
130. Nayak, P. K.; Yang, L.; Brehm, W.; Adelhelm, P. From lithium-ion to sodium-ion batteries: advantages, challenges, and surprises. Angew. Chem. Int. Ed. Engl. 2018, 57, 102-20.
131. Dong, Y.; Zeng, Q.; Ding, L.; et al. Modulating Na plating morphology via interfacial design to achieve energy-dense and fast-charging sodium-ion batteries. Nano. Energy. 2025, 136, 110777.
132. Li, Y.; Yu, L.; Hu, W.; Hu, X. Thermotolerant separators for safe lithium-ion batteries under extreme conditions. J. Mater. Chem. A. 2020, 8, 20294-317.
133. Roh, Y.; Jin, D.; Kim, E.; et al. Highly improved thermal stability of the ceramic coating layer on the polyethylene separator via chemical crosslinking between ceramic particles and polymeric binders. Chem. Eng. J. 2022, 433, 134501.
134. Dai, J.; Shi, C.; Li, C.; et al. A rational design of separator with substantially enhanced thermal features for lithium-ion batteries by the polydopamine-ceramic composite modification of polyolefin membranes. Energy. Environ. Sci. 2016, 9, 3252-61.
135. Zou, Z.; Yin, M.; Yin, P.; Hu, Z.; Wang, D.; Pu, H. Facile preparation of surface-modified polypropylene nanofiber separators with enhanced ionic transport and welding performance for lithium-ion batteries. Nano. Energy. 2024, 127, 109774.
136. Zhang, M.; Wang, L.; Xu, H.; Song, Y.; He, X. Polyimides as promising materials for lithium-ion batteries: a review. Nanomicro. Lett. 2023, 15, 135.
137. Wang, X.; Lin, Z.; Fu, Y.; et al. High-temperature resistant semi-crystalline poly(ether ether ketone) separator. Energy. Storage. Materials. 2025, 82, 104642.
138. Li, M.; Yuan, J.; Wang, K.; et al. Advances in thermal stable separators and solid electrolytes for high-temperature lithium-ion batteries. Energy. Storage. Mater. 2025, 77, 104163.
139. Chang, H.; Kang, G.; Zhang, Z.; Liu, W.; Jin, Y. Evaluation of asymmetric poly(vinylidene fluoride)-coated polyimide separator with three-dimensionally homogeneous microporous structure for high-safety lithium-ion battery. Energy. Mater. 2024, 4, 400052.
140. Guo, D.; Mu, L.; Lin, F.; Liu, G. Mesoporous polyimide thin films as dendrite-suppressing separators for lithium-metal batteries. ACS. Nano. 2024, 18, 155-63.
141. Chen, Z.; Guan, M.; Cheng, Y.; et al. Boehmite-enhanced poly(vinylidene fluoride-co-hexafluoropropylene)/polyacrylonitrile (PVDF-HFP/PAN) coaxial electrospun nanofiber hybrid membrane: a superior separator for lithium-ion batteries. Adv. Compos. Hybrid. Mater. 2023, 6, 219.
142. Lai, X.; Meng, Z.; Zhang, F.; et al. Mitigating thermal runaway hazard of high-energy lithium-ion batteries by poison agent. J. Energy. Chem. 2023, 83, 3-15.
143. Finegan, D. P.; Darcy, E.; Keyser, M.; et al. Identifying the cause of rupture of li-ion batteries during thermal runaway. Adv. Sci. (Weinh). 2018, 5, 1700369.
144. Zeng, W.; Mei, W.; He, X.; et al. Insights into the coupled thermal behavior of silicon/graphite composite anodes in high energy density lithium-ion battery. Energy. Storage. Mater. 2026, 84, 104841.
145. He, T.; Gadkari, S.; Zhang, T.; et al. Investigation of the internal physical and chemical changes of a cylindrical lithium-ion battery during thermal runaway. J. Clean. Prod. 2024, 434, 140548.
146. Spotte-Smith, E. W. C.; Petrocelli, T. B.; Patel, H. D.; Blau, S. M.; Persson, K. A. Elementary decomposition mechanisms of lithium hexafluorophosphate in battery electrolytes and interphases. ACS. Energy. Lett. 2022, 8, 347-55.
147. Nam, S.; Lee, J.; Kim, Y.; et al. From HF scavenging to Li‐ion transport enhancement: multifunctional separator enabling stable Li metal batteries in carbonate-based electrolytes. Adv. Energy. Mater. 2025, 16, e05601.
148. Banerjee, A.; Ziv, B.; Shilina, Y.; Luski, S.; Aurbach, D.; Halalay, I. C. Acid-scavenging separators: a novel route for improving Li-ion batteries’ durability. ACS. Energy. Lett. 2017, 2, 2388-93.
149. Qiu, Z.; Yuan, S.; Wang, Z.; et al. Construction of silica-oxygen-borate hybrid networks on Al2O3-coated polyethylene separators realizing multifunction for high-performance lithium ion batteries. J. Power. Sources. 2020, 472, 228445.
150. Yang, Y.; Yang, T.; Liu, L.; et al. Green in situ synthesis of ZIF-8 membranes on the inner-surface of PESf hollow fibers and application in hydrogen separation. Green. Chem. 2025, 27, 5282-94.
151. Li, W.; Song, B.; Manthiram, A. High-voltage positive electrode materials for lithium-ion batteries. Chem. Soc. Rev. 2017, 46, 3006-59.
152. Cho, J.; Park, J.; Lee, M.; Song, H.; Lee, S. A polymer electrolyte-skinned active material strategy toward high-voltage lithium ion batteries: a polyimide-coated LiNi0.5Mn1.5O4 spinel cathode material case. Energy. Environ. Sci. 2012, 5, 7124.
153. Zhang, Z.; Said, S.; Lovett, A. J.; et al. The influence of cathode degradation products on the anode interface in lithium-ion batteries. ACS. Nano. 2024, 18, 9389-402.
154. Zhong, S.; Xie, H.; Han, Y.; et al. Engineering interfacial immunity in high-nickel batteries with a mediating biodegradable separator. Adv. Energy. Mater. 2025, 16, e05311.
155. An, Q.; Liu, Q.; Mao, P.; et al. Developing the tandem structure to regulate interfacial chemistry and promote ion transport kinetics toward high-voltage lithium metal batteries. Angew. Chem. Int. Ed. Engl. 2025, 64, e202422539.
156. Callegari, D.; Canini, M.; Davino, S.; Coduri, M.; Mustarelli, P.; Quartarone, E. Chitosan-decorated alumina hybrid nanoparticles as smart scavengers of HF and dissolved transition metals in lithium-ion batteries. Adv. Funct. Mater. 2024, 34, 2406315.
157. Lagadec, M. F.; Zahn, R.; Wood, V. Characterization and performance evaluation of lithium-ion battery separators. Nat. Energy. 2018, 4, 16-25.
158. Jo, S.; Seo, S.; Kang, S. K.; et al. Thermal runaway mechanism in Ni-rich cathode full cells of lithium-ion batteries: the role of multidirectional crosstalk. Adv. Mater. 2024, 36, e2402024.
159. Song, Y.; Wang, L.; Sheng, L.; et al. The significance of mitigating crosstalk in lithium-ion batteries: a review. Energy. Environ. Sci. 2023, 16, 1943-63.
160. Ghosh, A.; Tian, S.; Zhang, M.; et al. Deciphering a new electrolyte formulation for intelligent modulation of thermal runaway to improve the safety of lithium-ion batteries. Adv. Funct. Mater. 2025, 35, 2502761.
161. Liu, J.; Wang, Z.; Bai, J. Influences of multi factors on thermal runaway induced by overcharging of lithium-ion battery. J. Energy. Chem. 2022, 70, 531-41.
162. Wang, Z.; Yuan, J.; Zhu, X.; et al. Overcharge-to-thermal-runaway behavior and safety assessment of commercial lithium-ion cells with different cathode materials: a comparison study. J. Energy. Chem. 2021, 55, 484-98.
163. Wang, B.; Gao, L.; Yang, Z.; et al. Interphase engineering enabled by using a separator with electrochemically active carbazole polymers for lithium-ion batteries. Polymers. (Basel). 2025, 17.
164. Hou, J.; Feng, X.; Wang, L.; et al. Unlocking the self-supported thermal runaway of high-energy lithium-ion batteries. Energy. Storage. Mater. 2021, 39, 395-402.
165. Sharifi‐Asl, S.; Lu, J.; Amine, K.; Shahbazian‐Yassar, R. Oxygen release degradation in Li-ion battery cathode materials: mechanisms and mitigating approaches. Adv. Energy. Mater. 2019, 9, 1900551.
166. Jiang, Z.; Liu, C.; Huang, L.; et al. Interfacial reactions take the lead: elucidating the dominant role of cathode-electrolyte interactions in triggering thermal runaway of high-nickel lithium-ion batteries. Energy. Environ. Sci. 2025, 18, 8232-43.
167. Zhou, J.; Zhang, C.; Xie, C.; et al. A low-cost Al(OH)3‐modified fire-retardant and shuttle-limiting separator for safe and stable lithium-sulfur batteries. Adv. Energy. Mater. 2023, 14, 2303063.
168. Chen, X.; Yu, Z.; Cui, W.; et al. Surfactant-Enabled BM particle-embedded coaxial PVDF/PEI electrospun membranes enhancing lithium-ion battery safety. Chem. Eng. J. 2025, 503, 158225.
169. Zhang, X.; Sun, Q.; Zhen, C.; et al. Recent progress in flame-retardant separators for safe lithium-ion batteries. Energy. Storage. Mater. 2021, 37, 628-47.
170. Peng, L.; Kong, X.; Li, H.; et al. A rational design for a high-safety lithium-ion battery assembled with a heatproof-fireproof bifunctional separator. Adv. Funct. Mater. 2020, 31, 2008537.
171. Zhou, Z.; Chen, B.; Fang, T.; et al. A multifunctional separator enables safe and durable lithium/magnesium-sulfur batteries under elevated temperature. Adv. Energy. Mater. 2019, 10, 1902023.
172. Tong, B.; Li, X. Towards separator safety of lithium-ion batteries: a review. Mater. Chem. Front. 2024, 8, 309-40.
173. Sheng, Y.; Yue, X.; Hao, W.; Ding, L.; Zhu, J.; Liang, Z. Heterojunction-coated graphite anode enables fast charging via built-in electric field-regulated interfacial li-ion transport. ACS. Energy. Lett. 2025, 10, 5075-83.
174. Su, F.; Lin, Y.; Dou, X.; et al. Compact ion-pair aggregates dominated electrolytes enable high-performance low-temperature lithium-ion batteries. Angew. Chem. Int. Ed. Engl. 2025, 64, e202510647.
175. Yuan, S.; Cao, S.; Chen, X.; et al. Deshielding anions enable solvation chemistry control of LiPF6-based electrolyte toward low-temperature lithium-ion batteries. Adv. Mater. 2024, 36, e2311327.
176. Zhu, Z.; Ji, J.; Qi, X.; et al. Rational anion selection of the electrolyte additive for highly reversible lithium plating/stripping. Adv. Energy. Mater. 2023, 13, 2300936.
177. Wang, Z.; Wang, H.; Qi, S.; et al. Structural regulation chemistry of lithium ion solvation for lithium batteries. EcoMat 2022, 4, e12200.
178. Lu, D.; Zhang, S.; Li, J.; et al. Transformed solvation structure of noncoordinating flame-retardant assisted propylene carbonate enabling high voltage Li-ion batteries with high safety and long cyclability. Adv. Energy. Mater. 2023, 13, 2300684.
179. Zhang, Y.; Cheng, L.; Zhu, Y.; et al. Reversible Li plating regulation on graphite anode through a barium sulfate nanofibers-based dielectric separator for fast charging and high-safety lithium-ion battery. J. Energy. Chem. 2025, 101, 511-23.
180. Stuckenberg, S.; Bela, M. M.; Lechtenfeld, C. T.; et al. Influence of LiNO3 on the lithium metal deposition behavior in carbonate-based liquid electrolytes and on the electrochemical performance in zero-excess lithium metal batteries. Small 2024, 20, e2305203.
181. Jia, H.; Liu, J.; Liu, B.; et al. Lignin-based separators for lithium-ion batteries via a dry fibrillation method. Adv. Mater. 2025, 37, e2419694.
182. Sheng, L.; Zhang, Y.; Xie, X.; et al. Polyethylene separator activated by γ-ray irradiation for improving lithium-based battery performance. J. Mater. Sci. 2021, 56, 20026-36.
183. Fu, K.; Li, X.; Sun, K.; et al. Thick electrode design for lithium-ion batteries from an ion-electron coupled transport perspective: from independent regulation to cooperative design. Energy. Z. 2026, 2, 200002.
184. Niu, X.; Lu, Y.; Chen, P.; et al. Gradient-matched microstructural engineering for fast-charging, damage-tolerant thick electrodes of lithium-ion batteries. Adv. Energy. Mater. 2025, 15, 2502245.
185. Zhao, C. X.; Wang, Z.; Jacobson, D.; et al. Electrolytes that reduce electro-osmotic drag improve fast charging of lithium-ion batteries. Science 2025, 390, 745-50.
186. Na, Y.; Chen, C. Catechol-functionalized polyolefins. Angew. Chem. Int. Ed. Engl. 2020, 59, 7953-9.
187. Liu, J.; Wan, Y.; Wang, K.; et al. Constructing an enhanced charge-mass transfer passage for silicon anodes to achieve increased capacity under high-rate conditions. Energy. Mater. 2025, 5, 500094.
188. Nelson, A.; Mateti, S.; Chen, Y.; Sharma, N.; Han, Q.; Rahman, M. M. Creating value added nano silicon anodes from end-of-life photovoltaic modules: recovery, nano structuring, and the impact of ball milling and binder on its electrochemical performance. Energy. Mater. 2024, 4, 400046.
189. Seo, J. Y.; Kim, S.; Kim, J. H.; et al. Mechanical shutdown of battery separators: silicon anode failure. Nat. Commun. 2024, 15, 10134.
190. Liu, X.; Zhao, J.; Wang, J.; et al. Electrolyte-philic and thermal-resistant polyimide separator enhances the performance of flexible silicon/carbon nanofibers for lithium-ion batteries. J. Energy. Storage. 2022, 54, 105324.
191. Hwang, J. Y.; Myung, S. T.; Sun, Y. K. Sodium-ion batteries: present and future. Chem. Soc. Rev. 2017, 46, 3529-614.
192. Xue, C.; Zhang, Y.; Zhang, Y.; et al. Fe single-atom-regulated carbon nanofibers for high-performance lithium/sodium ion battery anode. Energy. Mater. 2025, 5, 500113.
193. Recent commentaries on the expected performance, advantages and applications of sodium-ion batteries. Energy. Mater. 2023.
194. Li, M.; Zhuo, H.; Jing, Q.; et al. Low‐temperature performance of Na‐ion batteries. Carbon. Energy. 2024, 6, e546.
195. Zhao, Y.; Wang, L. P.; Sougrati, M. T.; et al. A review on design strategies for carbon based metal oxides and sulfides nanocomposites for high performance Li and Na ion battery anodes. Adv. Energy. Mater. 2016, 7, 1601424.
196. Chen, J.; Adit, G.; Li, L.; Zhang, Y.; Chua, D. H. C.; Lee, P. S. Optimization strategies toward functional sodium‐ion batteries. Energ. Environ. Mater. 2023, 6, e12633.
197. Hu, J.; Xu, L.; Li, X.; et al. Pre-sodiation strategies for constructing high-performance sodium-ion batteries. J. Mater. Chem. A. 2025, 13, 3206-35.
198. Zhang, L.; Li, X.; Yang, M.; Chen, W. High-safety separators for lithium-ion batteries and sodium-ion batteries: advances and perspective. Energy. Storage. Mater. 2021, 41, 522-45.
199. Li, C.; Du, L.; Ju, J.; et al. Assessment of safety concerns in sodium-ion batteries. Adv. Energy. Mater. 2025, 15, e03209.
200. Niu, J.; Dong, J.; Zhang, X.; et al. Sodium cluster-driven safety concerns of sodium-ion batteries. Energy. Environ. Sci. 2025, 18, 2474-84.
201. Aniskevich, Y.; Yu, J. H.; Kim, J. Y.; Komaba, S.; Myung, S. T. Tracking sodium cluster dynamics in hard carbon with a low specific surface area for sodium-ion batteries. Adv. Energy. Mater. 2024, 14, 2304300.
202. Wang, Z.; Feng, X.; Bai, Y.; et al. Probing the energy storage mechanism of quasi-metallic Na in hard carbon for sodium-ion batteries. Adv. Energy. Mater. 2021, 11, 2003854.
203. Zeng, Y.; Yang, J.; Yang, H.; Yang, Y.; Zhao, J. Bridging microstructure and sodium-ion storage mechanism in hard carbon for sodium ion batteries. ACS. Energy. Lett. 2024, 9, 1184-91.
204. Zhou, H.; Song, Y.; Zhang, B.; et al. Overview of electrochemical competing process of sodium storage and metal plating in hard carbon anode of sodium ion battery. Energy. Storage. Mater. 2024, 71, 103645.
205. Du, L.; Xu, G.; Zhang, Z.; et al. Multifunctional polyimide separator enabling the long-life operation of sodium ion batteries at elevated temperatures. ACS. Energy. Lett. 2025, 10, 3941-51.
206. Li, X.; Zhang, T.; Zhao, Y.; et al. Enhancing robustness and charge transfer kinetics of sodium-ion batteries through introduction of anionic anchoring separators. J. Am. Chem. Soc. 2025, 147, 8488-99.
207. Wang, J.; Wang, Z.; Ni, J.; Li, L. Electrospinning for flexible sodium-ion batteries. Energy. Storage. Mater. 2022, 45, 704-19.
208. Yang, J. L.; Zhao, X. X.; Zhang, W.; et al. “Pore-hopping” ion transport in cellulose-based separator towards high-performance sodium-ion batteries. Angew. Chem. Int. Ed. Engl. 2023, 62, e202300258.
209. Yang, J. L.; Zhao, X. X.; Liu, H. H.; et al. Nature-inspired separator with thermal sealing reinforcement toward sustainable sodium-ion batteries. ACS. Nano. 2025, 19, 15983-93.
210. Tang, W.; Ma, J.; Zhang, X.; et al. Interfacial strategies towards highly stable Li-metal anode of liquid-based Li-metal batteries. Energy. Storage. Mater. 2024, 64, 103084.
211. Hu, Y.; Chen, Z.; Wang, Y.; et al. Review of thin lithium metal battery anode fabrication - microstructure - electrochemistry relations. Adv. Mater. 2026, 38, e11817.
212. Dong, Y.; Liu, C.; Rui, M.; et al. Review on graphite anodes for fast-charging lithium-ion batteries: mechanism, modification and characterizations. Adv. Funct. Mater. 2025, 35, 2506190.
213. Song, B.; Luo, Z.; Liu, X.; et al. Bridging donor ligands enable an ultrastable graphite anode for sodium-ion batteries. Angew. Chem. Int. Ed. Engl. 2025, 64, e202503027.
214. Ko, S.; Obukata, T.; Shimada, T.; et al. Electrode potential influences the reversibility of lithium-metal anodes. Nat. Energy. 2022, 7, 1217-24.
215. He, X.; Zheng, S.; Sun, K.; et al. Operando electrode-scale stress characterization revealing the Li+ insertion mechanism of graphite anode. Energy. Storage. Mater. 2025, 82, 104629.
216. Wang, C.; Ouyang, T.; Wang, X.; et al. Accelerating lithium ion transport via increasing the entropy of the electrolyte for stable lithium metal batteries. J. Energy. Chem. 2024, 99, 384-92.
217. Zhao, Z.; Nian, B.; Lei, Y.; et al. Passivation layers in Mg-metal batteries: robust interphases for Li-metal batteries. Adv. Mater. 2024, 36, e2402626.
218. Lee, G.; Han, D. Y.; Park, S.; et al. Regulating polymer demixing dynamics to construct a low-tortuosity host for stable high-energy-density lithium metal batteries. Adv. Mater. 2026, 38, e10919.
219. You, J.; Lu, J.; Liu, C.; et al. A rationally thin composite membrane with differentiated pore structure for industrial-scale alkaline water electrolysis. Nat. Commun. 2025, 16, 5981.
220. Liao, C.; Zheng, T.; Zhu, J.; et al. Engineering durable nitrate-enriched solvation sheaths in carbonate electrolytes through functional separator design for high-voltage lithium metal batteries. Nano. Energy. 2025, 142, 111283.
221. Cao, S.; He, X.; Chen, M.; et al. A CF4 plasma functionalized polypropylene separator for dendrite-free lithium metal anodes. J. Mater. Chem. A. 2023, 11, 7545-55.
222. Huang, Z.; Lyu, H.; Greenburg, L. C.; Cui, Y.; Bao, Z. Stabilizing lithium-metal electrodes with polymer coatings. Nat. Energy. 2025, 10, 811-23.
223. Wang, K.; Zhao, T.; Lv, R.; et al. Lithium metal batteries enabled by ion flux-regulating coating on separator. Adv. Funct. Mater. 2025, 35, e08164.
224. Jin, H.; Pyo, S.; Seo, H.; et al. LiF-rich solid electrolyte interphase formation by establishing sacrificial layer on the separator. Small 2024, 20, e2401928.
225. Chang, Z.; Yang, H.; Pan, A.; He, P.; Zhou, H. An improved 9 micron thick separator for a 350 Wh/kg lithium metal rechargeable pouch cell. Nat. Commun. 2022, 13, 6788.
226. Chen, J.; Tang, Z.; Zhu, D.; et al. Stabilizing Li-metal electrode via anion-induced desolvation in a covalent organic framework separator. ACS. Nano. 2025, 19, 9232-40.
227. Liu, Y.; Hou, T.; Zhang, W.; et al. Anion‐repulsive polyoxometalate@MOF‐modified separators for dendrite‐free and high‐rate lithium batteries. Interd. Mater. 2024, 4, 190-200.
228. Du, M.; He, Z.; Zhang, Y.; Cai, Y. P.; Zheng, Q. Sustainable release of LiNO3 from a fluorine-decorated metal-organic framework separator to enable high-performance Li‐metal batteries in carbonate electrolytes. Adv. Energy. Mater. 2025, 15, 2403674.
229. Han, D.; Wang, X.; Zhou, Y. N.; et al. A graphene-coated thermal conductive separator to eliminate the dendrite-induced local hotspots for stable lithium cycling. Adv. Energy. Mater. 2022, 12, 2201190.
230. Park, B. K.; Nam, D. W.; Ma, D.; et al. Strategic design of a functional separator with dual-acting Si/SiOx nanocomposite for dendrite-free Li-metal batteries. ACS. Nano. 2025, 19, 26659-72.
231. Wang, Y.; Zhang, Y.; Zhang, Y.; et al. Dual protection of Li-metal anode by black phosphorus-modified separator via modulating solid electrolyte interphase and eliminating Li dendrites. Small. Methods. 2025, 9, e2500201.
232. Feng, S.; Fu, Z. H.; Chen, X.; Zhang, Q. A review on theoretical models for lithium-sulfur battery cathodes. InfoMat 2022, 4, e12304.
233. Li, S.; Fan, Z. Encapsulation methods of sulfur particles for lithium-sulfur batteries: a review. Energy. Storage. Mater. 2021, 34, 107-27.
234. Wang, J.; Han, W. Q. A review of heteroatom doped materials for advanced lithium-sulfur batteries. Adv. Funct. Mater. 2021, 32, 2107166.
235. Li, M.; Wang, J.; Cao, G.; et al. Optimization of single-atom catalysts for sulfur cathode in lithium-sulfur batteries: a review. Nano. Energy. 2025, 143, 111330.
236. Zhu, X.; Iqbal, S.; Kumar, N.; et al. The catalytic chemistry for high-performance lithium-sulfur batteries: a review and prospects. Adv. Funct. Mater. 2025, 35, e11659.
237. Chen, M.; Shao, M.; Jin, J.; Cui, L.; Tu, H.; Fu, X. Configurational and structural design of separators toward shuttling-free and dendrite-free lithium-sulfur batteries: a review. Energy. Storage. Mater. 2022, 47, 629-48.
238. Rosenman, A.; Markevich, E.; Salitra, G.; Aurbach, D.; Garsuch, A.; Chesneau, F. F. Review on Li-sulfur battery systems: an integral perspective. Adv. Energy. Mater. 2015, 5, 1500212.
239. Yan, Y.; Zhou, X.; He, J.; et al. Self-supporting metal-organic frameworks (MOFs) and their derivatives for lithium-sulfur batteries: a comprehensive review. Coord. Chem. Rev. 2026, 548, 217218.
240. Fu, X.; Wang, Y.; Scudiero, L.; Zhong, W. A polymeric nanocomposite interlayer as ion-transport-regulator for trapping polysulfides and stabilizing lithium metal. Energy. Storage. Mater. 2018, 15, 447-57.
241. Hou, L.; Zhang, X.; Li, B.; Zhang, Q. Challenges and promises of lithium metal anode by soluble polysulfides in practical lithium-sulfur batteries. Mater. Today. 2021, 45, 62-76.
242. Su, Y. S.; Manthiram, A. Lithium-sulphur batteries with a microporous carbon paper as a bifunctional interlayer. Nat. Commun. 2012, 3, 1166.
243. Wang, X.; Zou, N.; Qiao, Y.; et al. Spatially structured lamellar porous Carbon-CoS2 separator for enhanced adsorption and conversion of lithium polysulfides in high-performance Li-S batteries. Chem. Eng. J. 2025, 515, 163529.
244. Wang, L.; Yue, K.; Qiao, Q.; et al. In situ self-polymerization of thioctic acid enabled interphase engineering towards high-performance lithium-sulfur battery. Adv. Energy. Mater. 2024, 15, 2402617.
245. Zhou, X.; Li, X.; Li, Z.; et al. Ten micrometer thick polyethylene separator modified by α-LiAlO2@γ-Al2O3 nanosheets for simultaneous suppression of Li dendrite growth and polysulfide shuttling in Li-S batteries. Mater. Today. Energy. 2022, 26, 100990.
246. Ko, I.; Ha, S.; Shin, W. H.; et al. Clay-mineral-coated separators for lithium-ion batteries: exploring the relationships between clay mineral morphology and separator performance. Adv. Sci. (Weinh). 2025, 12, e10779.
247. Hou, T. Z.; Chen, X.; Peng, H. J.; et al. Design principles for heteroatom-doped nanocarbon to achieve strong anchoring of polysulfides for lithium-sulfur batteries. Small 2016, 12, 3283-91.
248. Li, Q.; Song, Y.; Xu, R.; et al. Biotemplating growth of nepenthes-like N-doped graphene as a bifunctional polysulfide scavenger for Li-S batteries. ACS. Nano. 2018, 12, 10240-50.
249. Pei, F.; Lin, L.; Fu, A.; et al. A two-dimensional porous carbon-modified separator for high-energy-density Li-S batteries. Joule 2018, 2, 323-36.
250. Wang, L.; Yang, Z.; Nie, H.; et al. A lightweight multifunctional interlayer of sulfur-nitrogen dual-doped graphene for ultrafast, long-life lithium-sulfur batteries. J. Mater. Chem. A. 2016, 4, 15343-52.
251. Zeng, P.; Huang, L.; Zhang, X.; Zhang, R.; Wu, L.; Chen, Y. Long-life and high-areal-capacity lithium-sulfur batteries realized by a honeycomb-like N, P dual-doped carbon modified separator. Chem. Eng. J. 2018, 349, 327-37.
252. Ponraj, R.; Kannan, A. G.; Ahn, J. H.; et al. Effective trapping of lithium polysulfides using a functionalized carbon nanotube-coated separator for lithium-sulfur cells with enhanced cycling stability. ACS. Appl. Mater. Interfaces. 2017, 9, 38445-54.
253. Tu, S.; Chen, X.; Zhao, X.; et al. A polysulfide-immobilizing polymer retards the shuttling of polysulfide intermediates in lithium-sulfur batteries. Adv. Mater. 2018, 30, e1804581.
254. Qiao, X.; Wang, C.; Zang, J.; et al. Conductive inks composed of multicomponent carbon nanomaterials and hydrophilic polymer binders for high-energy-density lithium-sulfur batteries. Energy. Storage. Materials. 2022, 49, 236-45.
255. Luo, L.; Chung, S.; Manthiram, A. A trifunctional multi-walled carbon nanotubes/polyethylene glycol (MWCNT/PEG)-coated separator through a layer-by-layer coating strategy for high-energy Li-S batteries. J. Mater. Chem. A. 2016, 4, 16805-11.
256. Chung, S. H.; Manthiram, A. A polyethylene glycol-supported microporous carbon coating as a polysulfide trap for utilizing pure sulfur cathodes in lithium-sulfur batteries. Adv. Mater. 2014, 26, 7352-7.
257. Shaibani, M.; Akbari, A.; Sheath, P.; et al. Suppressed polysulfide crossover in Li-S batteries through a high-flux graphene oxide membrane supported on a sulfur cathode. ACS. Nano. 2016, 10, 7768-79.
258. Kong, W.; Yan, L.; Luo, Y.; et al. Ultrathin MnO2/graphene oxide/carbon nanotube interlayer as efficient polysulfide-trapping shield for high-performance Li-S batteries. Adv. Funct. Mater. 2017, 27, 1606663.
259. Fan, B.; Chen, W.; Li, K.; et al. Synergistic adsorption and catalytic effects of Ti3C2Tx/CoO/MoO3 composite on lithium polysulfides for high‐performance lithium–sulfur batteries. Interd. Mater. 2024, 3, 726-37.
260. Gu, H.; Yue, W.; Hu, J.; et al. Asymmetrically coordinated Cu-N1C2 single-atom catalyst immobilized on Ti3C2Tx MXene as separator coating for lithium-sulfur batteries. Adv. Energy. Mater. 2023, 13, 2204014.
261. Kang, X.; He, T.; Dang, H.; et al. Designing amino functionalized titanium-organic framework on separators toward sieving and redistribution of polysulfides in lithium-sulfur batteries. Nanomicro. Lett. 2025, 17, 277.
262. Wang, T.; He, J.; Zhu, Z.; et al. Heterostructures regulating lithium polysulfides for advanced lithium-sulfur batteries. Adv. Mater. 2023, 35, e2303520.
263. Garapati, M. S. V.s., A. P.; Sundara, R. Synergy between partially exfoliated carbon nanotubes-sulfur cathode and nitrogen rich dual function interlayer for high performance lithium sulfur battery. Carbon 2019, 147, 364-76.
264. Deng, D. R.; Bai, C. D.; Xue, F.; et al. Multifunctional ion-sieve constructed by 2D materials as an interlayer for Li-S batteries. ACS. Appl. Mater. Interfaces. 2019, 11, 11474-80.
265. Zong, Y.; He, H.; Wang, Y.; et al. Functionalized separator strategies toward advanced aqueous zinc-ion batteries. Adv. Energy. Mater. 2023, 13, 2300403.
266. Chen, S.; Wang, Y.; Sun, Y.; et al. Research status and prospect of separators for magnesium-sulfur batteries. J. Energy. Chem. 2023, 87, 225-46.
267. Fang, Y.; Xie, X.; Zhang, B.; et al. Regulating zinc deposition behaviors by the conditioner of PAN separator for zinc-ion batteries. Adv. Funct. Mater. 2021, 32, 2109671.
268. Wang, T.; Xiao, Y.; Xiang, W.; Tang, S.; Yu, J. S. Stable zinc electrode/separator interface enabled by phthalocyanine-modified separator for advanced zinc metal batteries. Small 2025, 21, e2503907.
269. Yang, Z. The size and structure of selected hydrated ions and implications for ion channel selectivity. RSC. Adv. 2015, 5, 1213-9.
270. Wan, H.; Xu, J.; Wang, C. Designing electrolytes and interphases for high-energy lithium batteries. Nat. Rev. Chem. 2024, 8, 30-44.
271. Tian, Y.; Zeng, G.; Rutt, A.; et al. Promises and challenges of next-generation “beyond Li-ion” batteries for electric vehicles and grid decarbonization. Chem. Rev. 2021, 121, 1623-69.
272. Lee, Y.; Thirumalai, D.; Hyeon, C. Ultrasensitivity of water exchange kinetics to the size of metal ion. J. Am. Chem. Soc. 2017, 139, 12334-7.
273. Kazemzadeh, H.; Karimi-sabet, J.; Towfighi Darian, J.; Adhami, A. Evaluation of polymer inclusion membrane efficiency in selective separation of lithium ion from aqueous solution. Sep. Purif. Technol. 2020, 251, 117298.
274. Sun, D. F.; Wang, Z. J.; Tian, T.; et al. Constructing oxygen deficiency‐rich V2O3@PEDOT cathode for high‐performance aqueous zinc‐ion batteries. Rare. Metals. 2023, 43, 635-46.
275. Wang, Y. Y.; Song, X.; Liu, S.; Li, G. R.; Ye, S. H.; Gao, X. P. Elucidating the effect of the dopant ionic radius on the structure and electrochemical performance of Ni-rich layered oxides for lithium-ion batteries. ACS. Appl. Mater. Interfaces. 2021, 13, 56233-41.
276. Yu, T.; Kim, J.; Hwang, J.; et al. High-energy O3-Na1-2xCax[Ni0.5Mn0.5]O2 cathodes for long-life sodium-ion batteries. J. Mater. Chem. A. 2020, 8, 13776-86.
277. Lee, Y.; Kim, H.; Son, H.; Kim, M.; Lee, G. Engineering of protective surfaces for retarding selenium leaching by self-growth of rGO@Ni Se on carbon nanofibers for potassium ion batteries. J. Alloys. Compd. 2024, 1000, 175071.
278. Gu, W.; Wu, K.; Huang, J.; et al. The role and mechanism of separators in aqueous zinc metal batteries: a critical review. Adv. Energy. Mater. 2025, 15, 2502652.
279. Li, B.; Zeng, Y.; Zhang, W.; et al. Separator designs for aqueous zinc-ion batteries. Sci. Bull. (Beijing). 2024, 69, 688-703.
280. Cao, J.; Rao, X.; Qian, S.; et al. Dynamic Zn2+‐coordinating oxygen sites and electric field modulation in boron-integrated cellulose nanofiber separators for stable zinc‐ion batteries. Adv. Energy. Mater. 2025, 15, e03368.
281. Sui, B. B.; Sha, L.; Wang, P. F.; et al. Salt solution etching to construct micro-gullies on the surface of Zn anodes enhances anodes performance in aqueous zinc-ion batteries. J. Colloid. Interface. Sci. 2024, 653, 159-69.
282. Su, Y.; Liu, B.; Zhang, Q.; et al. Printing‐Scalable Ti3C2Tx MXene‐decorated Janus separator with expedited Zn2+ flux toward stabilized Zn anodes. Adv. Funct. Mater. 2022, 32, 2204306.
283. Wu, F.; Du, F.; Ruan, P.; et al. Regulating zinc deposition behaviors by using a functional PANI modification layer on a separator for high performance aqueous zinc-ion batteries. J. Mater. Chem. A. 2023, 11, 11254-63.
284. Xue, X.; Huang, T.; Zhang, Y.; et al. Synergy of electrolyte manipulation and separator functionalization enables ultralong-life nonaqueous magnesium-organic batteries. J. Mater. Chem. A. 2024, 12, 24955-65.
285. Song, Y.; Ruan, P.; Mao, C.; et al. Metal-organic frameworks functionalized separators for robust aqueous zinc-ion batteries. Nanomicro. Lett. 2022, 14, 218.
286. Zhang, Y.; Zeng, Z.; Yang, S.; Zhang, Y.; Ma, Y.; Wang, Z. A nanocellulose-mediated, multiscale ion-sieving separator with selective Zn2+ channels for durable aqueous zinc-based batteries. Energy. Storage. Mater. 2023, 57, 557-67.
287. Zhang, Y.; Li, J.; Zhao, W.; et al. Defect-free metal-organic framework membrane for precise ion/solvent separation toward highly stable magnesium metal anode. Adv. Mater. 2022, 34, e2108114.
288. Zhou, W.; Yang, M.; Chen, M.; et al. Ion-sieving effect enabled by sulfonation of cellulose separator realizing dendrite-free Zn deposition. Adv. Funct. Mater. 2024, 34, 2315444.
289. Li, R.; Sui, B.; Wang, P.; et al. Modulation of zinc deposition behaviour by electrostatically spun PAN-ZnTFSI fibre layer on separator for aqueous zinc ion batteries. J. Alloys. Compd. 2024, 997, 174899.
290. Wang, F.; Hua, H.; Wu, D.; et al. Solvent molecule design enables excellent charge transfer kinetics for a magnesium metal anode. ACS. Energy. Lett. 2022, 8, 780-9.
291. Ren, W.; Ng, M. S.; Zhang, Y.; et al. Fluorine-free ion-selective membrane with enhanced Mg2+ Transport for Mg-organic batteries. ACS. Nano. 2025, 19, 5781-8.
292. Yan, L.; Zhang, Q.; Zhang, Z.; et al. Hydrogel electrolyte membrane with regulated pore effect to stabilize zinc anode in aqueous zinc-ion batteries. J. Membr. Sci. 2024, 690, 122243.
293. Mao, Y.; Liu, S.; Liu, J.; et al. Ultrathin polydopamine/BaTiO3 modified PTFE separator with synergistic hydrophilic and electric field regulation toward stable zinc deposition. ACS. Appl. Polym. Mater. 2025, 7, 14281-91.
